Home › Machines › Creality Falcon2 40W
Creality Falcon2 40W specs, bed size and cutting speeds
The Creality Falcon2 40W is a Diode (40 W) laser with a 400 × 415 mm work area. Below: full specs, real cutting speeds by material, and what a part costs in machine time. Drop your SVG, DXF or PDF to price your own file — it runs entirely in your browser and nothing is uploaded.
Open the calculator for the Creality Falcon2 40W →Creality Falcon2 40W specs
| Laser type | Diode (~450 nm) |
|---|---|
| Power class | Diode (40 W) |
| Bed size (work area) | 400 × 415 mm |
| Work area (inches) | 15.7 × 16.3 in |
| Cuts | opaque acrylic only (clear acrylic passes the diode beam), plywood, MDF, card, leather, fabric |
| Approx. price | ~€1,500 (machine only, August 2026 — from our small-business laser buying guide) |
Creality Falcon2 40W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 8 mm/s | 40 s | €0.67 |
| MDF 3 mm | 8.8 mm/s | 36 s | €0.61 |
| Acrylic 3 mm | 7.2 mm/s | 44 s | €0.74 |
| Cardboard 3 mm | 14 mm/s | 23 s | €0.38 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
Creality Falcon2 40W FAQ
How fast does the Creality Falcon2 40W cut 3 mm plywood?
About 8 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 40 s of machine time on the Creality Falcon2 40W.
Can the Creality Falcon2 40W cut clear acrylic?
No. The Creality Falcon2 40W is a diode laser (~450 nm) and passes straight through clear acrylic. It can cut dark, opaque acrylic. Use a CO2 laser for clear acrylic.
What is the Creality Falcon2 40W bed size?
The Creality Falcon2 40W has a 400 × 415 mm work area (15.7 × 16.3 inches). That is the largest part it can cut in one pass without repositioning the material.
How much does it cost to run the Creality Falcon2 40W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.67. Use the calculator to price your own file.
How much does the Creality Falcon2 40W cost?
~€1,500 as of August 2026, for the machine alone. Budget extra for extraction, a decent air assist and material. Street prices move, so treat this as a starting point and check the seller before you quote work on it. Full reasoning in our small-business laser buying guide.
Where to buy the Creality Falcon2 40W
Prices move often — check current offers before you quote jobs on a machine you don't own yet.
Some links are affiliate links: if you buy through them we may earn a small commission at no extra cost to you. It keeps this calculator free.
Machines similar to the Creality Falcon2 40W
Comparable on speed, bed size and material capability — the specs side by side:
- xTool S1 40W — Diode (40 W), 498 × 319 mm, 8 mm/s in 3 mm plywood. similar class
- Creality Falcon2 22W — Diode (20 W), 400 × 415 mm, 6 mm/s in 3 mm plywood. similar class
- Atomstack A20 Pro — Diode (20 W), 400 × 400 mm, 6 mm/s in 3 mm plywood. similar class
- Atomstack X70 Max (70W) — Diode (70 W), 850 × 800 mm, 10 mm/s in 3 mm plywood. about 1.3× the cutting speed
Or see the full machine list and the complete speed table.
← All machine calculators · Full speed table · Main calculator