Trotec Speedy 300 / 360 / 400 Laser Cutting Cost Calculator
Estimate cutting time and price for the Trotec Speedy 300 / 360 / 400 — a Professional CO2 laser. Drop your SVG, DXF or PDF, or just type a size. It runs entirely in your browser; your file is never uploaded.
Open the calculator for the Trotec Speedy 300 / 360 / 400 →Trotec Speedy 300 / 360 / 400 at a glance
| Laser type | CO2 (10,600 nm) |
|---|---|
| Class | Professional CO2 |
| Typical work area | 726 × 432 mm |
| Cuts | clear and opaque acrylic, plywood, MDF, card, leather, fabric |
Trotec Speedy 300 / 360 / 400 cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 20 mm/s | 16 s | €0.27 |
| MDF 3 mm | 22 mm/s | 15 s | €0.24 |
| Acrylic 3 mm | 18 mm/s | 18 s | €0.30 |
| Cardboard 3 mm | 35 mm/s | 9 s | €0.15 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
Trotec Speedy 300 / 360 / 400 FAQ
How fast does the Trotec Speedy 300 / 360 / 400 cut 3 mm plywood?
About 20 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 16 s of machine time on the Trotec Speedy 300 / 360 / 400.
Can the Trotec Speedy 300 / 360 / 400 cut clear acrylic?
Yes. The Trotec Speedy 300 / 360 / 400 is a CO2 laser (10,600 nm) and cuts both clear and opaque acrylic, plus plywood, MDF, leather, card and fabric.
How much does it cost to run the Trotec Speedy 300 / 360 / 400?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.27. Use the calculator to price your own file.
← All machine calculators · Full speed table · Main calculator