Home › Machines › Creality Falcon A1 Pro 20W
Creality Falcon A1 Pro 20W specs, bed size and cutting speeds
The Creality Falcon A1 Pro 20W is a Diode (20 W) laser with a 358 × 268 mm work area. Below: full specs, real cutting speeds by material, and what a part costs in machine time. Drop your SVG, DXF or PDF to price your own file — it runs entirely in your browser and nothing is uploaded.
Open the calculator for the Creality Falcon A1 Pro 20W →Creality Falcon A1 Pro 20W specs
| Laser type | Diode (~450 nm) |
|---|---|
| Power class | Diode (20 W) |
| Bed size (work area) | 358 × 268 mm |
| Work area (inches) | 14.1 × 10.6 in |
| Cuts | opaque acrylic only (clear acrylic passes the diode beam), plywood, MDF, card, leather, fabric |
Creality Falcon A1 Pro 20W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 6 mm/s | 53 s | €0.89 |
| MDF 3 mm | 6.6 mm/s | 48 s | €0.81 |
| Acrylic 3 mm | 5.4 mm/s | 59 s | €0.99 |
| Cardboard 3 mm | 10.5 mm/s | 30 s | €0.51 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
Creality Falcon A1 Pro 20W FAQ
How fast does the Creality Falcon A1 Pro 20W cut 3 mm plywood?
About 6 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 53 s of machine time on the Creality Falcon A1 Pro 20W.
Can the Creality Falcon A1 Pro 20W cut clear acrylic?
No. The Creality Falcon A1 Pro 20W is a diode laser (~450 nm) and passes straight through clear acrylic. It can cut dark, opaque acrylic. Use a CO2 laser for clear acrylic.
What is the Creality Falcon A1 Pro 20W bed size?
The Creality Falcon A1 Pro 20W has a 358 × 268 mm work area (14.1 × 10.6 inches). That is the largest part it can cut in one pass without repositioning the material.
How much does it cost to run the Creality Falcon A1 Pro 20W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.89. Use the calculator to price your own file.
Machines similar to the Creality Falcon A1 Pro 20W
Comparable on speed, bed size and material capability — the specs side by side:
- xTool D1 Pro 20W / S1 20W — Diode (20 W), 498 × 319 mm, 6 mm/s in 3 mm plywood. similar class
- Atomstack A20 Pro — Diode (20 W), 400 × 400 mm, 6 mm/s in 3 mm plywood. similar class
- Creality Falcon2 22W — Diode (20 W), 400 × 415 mm, 6 mm/s in 3 mm plywood. similar class
- xTool S1 40W — Diode (40 W), 498 × 319 mm, 8 mm/s in 3 mm plywood. about 1.3× the cutting speed
Or see the full machine list and the complete speed table.
← All machine calculators · Full speed table · Main calculator