xTool D1 Pro 20W / S1 20W Laser Cutting Cost Calculator
Estimate cutting time and price for the xTool D1 Pro 20W / S1 20W — a Diode (20 W) laser. Drop your SVG, DXF or PDF, or just type a size. It runs entirely in your browser; your file is never uploaded.
Open the calculator for the xTool D1 Pro 20W / S1 20W →xTool D1 Pro 20W / S1 20W at a glance
| Laser type | Diode (~450 nm) |
|---|---|
| Class | Diode (20 W) |
| Typical work area | 498 × 319 mm |
| Cuts | opaque acrylic only (clear acrylic passes the diode beam), plywood, MDF, card, leather, fabric |
xTool D1 Pro 20W / S1 20W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 6 mm/s | 53 s | €0.89 |
| MDF 3 mm | 6.6 mm/s | 48 s | €0.81 |
| Acrylic 3 mm | 5.4 mm/s | 59 s | €0.99 |
| Cardboard 3 mm | 10.5 mm/s | 30 s | €0.51 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
xTool D1 Pro 20W / S1 20W FAQ
How fast does the xTool D1 Pro 20W / S1 20W cut 3 mm plywood?
About 6 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 53 s of machine time on the xTool D1 Pro 20W / S1 20W.
Can the xTool D1 Pro 20W / S1 20W cut clear acrylic?
No. The xTool D1 Pro 20W / S1 20W is a diode laser (~450 nm) and passes straight through clear acrylic. It can cut dark, opaque acrylic. Use a CO2 laser for clear acrylic.
How much does it cost to run the xTool D1 Pro 20W / S1 20W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.89. Use the calculator to price your own file.
← All machine calculators · Full speed table · Main calculator