Industrial CO2 130–150W Laser Cutting Cost Calculator
Estimate cutting time and price for the Industrial CO2 130–150W — a CO2 130 W+ laser. Drop your SVG, DXF or PDF, or just type a size. It runs entirely in your browser; your file is never uploaded.
Open the calculator for the Industrial CO2 130–150W →Industrial CO2 130–150W at a glance
| Laser type | CO2 (10,600 nm) |
|---|---|
| Class | CO2 130 W+ |
| Typical work area | 1300 × 900 mm |
| Cuts | clear and opaque acrylic, plywood, MDF, card, leather, fabric |
Industrial CO2 130–150W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 24 mm/s | 13 s | €0.22 |
| MDF 3 mm | 26.4 mm/s | 12 s | €0.20 |
| Acrylic 3 mm | 21.6 mm/s | 15 s | €0.25 |
| Cardboard 3 mm | 42 mm/s | 8 s | €0.13 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
Industrial CO2 130–150W FAQ
How fast does the Industrial CO2 130–150W cut 3 mm plywood?
About 24 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 13 s of machine time on the Industrial CO2 130–150W.
Can the Industrial CO2 130–150W cut clear acrylic?
Yes. The Industrial CO2 130–150W is a CO2 laser (10,600 nm) and cuts both clear and opaque acrylic, plus plywood, MDF, leather, card and fabric.
How much does it cost to run the Industrial CO2 130–150W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €0.22. Use the calculator to price your own file.
← All machine calculators · Full speed table · Main calculator