Home › Machines › xTool D1 Pro 10W
xTool D1 Pro 10W specs, bed size and cutting speeds
The xTool D1 Pro 10W is a Diode (10 W) laser with a 430 × 390 mm work area. Below: full specs, real cutting speeds by material, and what a part costs in machine time. Drop your SVG, DXF or PDF to price your own file — it runs entirely in your browser and nothing is uploaded.
Open the calculator for the xTool D1 Pro 10W →xTool D1 Pro 10W specs
| Laser type | Diode (~450 nm) |
|---|---|
| Power class | Diode (10 W) |
| Bed size (work area) | 430 × 390 mm |
| Work area (inches) | 16.9 × 15.4 in |
| Cuts | opaque acrylic only (clear acrylic passes the diode beam), plywood, MDF, card, leather, fabric |
| Approx. price | ~€450–550 (machine only, August 2026 — from our budget laser engraver guide) |
xTool D1 Pro 10W cutting cost examples
Machine time and price for a 100 × 60 mm part (320 mm of cutting) at €60/h, by material:
| Material | Speed | Time | Price |
|---|---|---|---|
| Plywood 3 mm | 4 mm/s | 1 m 20 s | €1.33 |
| MDF 3 mm | 4.4 mm/s | 1 m 13 s | €1.21 |
| Acrylic 3 mm | 3.6 mm/s | 1 m 29 s | €1.48 |
| Cardboard 3 mm | 7 mm/s | 46 s | €0.76 |
These scale from real workshop speeds. Your parts differ — open the calculator and drop your file or enter your size for an exact figure. You can also switch to engraving.
xTool D1 Pro 10W FAQ
How fast does the xTool D1 Pro 10W cut 3 mm plywood?
About 4 mm/s. Cutting a 100 × 60 mm part (320 mm of cut) takes roughly 1 m 20 s of machine time on the xTool D1 Pro 10W.
Can the xTool D1 Pro 10W cut clear acrylic?
No. The xTool D1 Pro 10W is a diode laser (~450 nm) and passes straight through clear acrylic. It can cut dark, opaque acrylic. Use a CO2 laser for clear acrylic.
What is the xTool D1 Pro 10W bed size?
The xTool D1 Pro 10W has a 430 × 390 mm work area (16.9 × 15.4 inches). That is the largest part it can cut in one pass without repositioning the material.
How much does it cost to run the xTool D1 Pro 10W?
Laser cutting is priced by machine time: cut length ÷ cutting speed × passes = time, then time × hourly rate + setup. At €60/h a 100 × 60 mm plywood part costs about €1.33. Use the calculator to price your own file.
How much does the xTool D1 Pro 10W cost?
~€450–550 as of August 2026, for the machine alone. Budget extra for extraction, a decent air assist and material. Street prices move, so treat this as a starting point and check the seller before you quote work on it. Full reasoning in our budget laser engraver guide.
Where to buy the xTool D1 Pro 10W
Prices move often — check current offers before you quote jobs on a machine you don't own yet.
Some links are affiliate links: if you buy through them we may earn a small commission at no extra cost to you. It keeps this calculator free.
Machines similar to the xTool D1 Pro 10W
Comparable on speed, bed size and material capability — the specs side by side:
- Sculpfun S9 — Diode (10 W), 410 × 420 mm, 4 mm/s in 3 mm plywood. similar class
- Ortur Laser Master 3 — Diode (10 W), 400 × 400 mm, 4 mm/s in 3 mm plywood. similar class
- Creality Falcon2 22W — Diode (20 W), 400 × 415 mm, 6 mm/s in 3 mm plywood. similar class
- xTool D1 Pro 20W / S1 20W — Diode (20 W), 498 × 319 mm, 6 mm/s in 3 mm plywood. about 1.5× the cutting speed
Or see the full machine list and the complete speed table.
← All machine calculators · Full speed table · Main calculator